FREE SHIPPING for orders over $100

Afterpay Now Available - Shop Now. Wear Now. Pay Later | FREE SHIPPING for orders over $100

My Cart 0

FAQs | MyFit Pod

How do I insert the battery?

Step 1: Twist counter clockwise to release the Pod from the holder. Step 2: With a coin, unscrew the battery cap counter clockwise and remove. Step 3: Place the battery “+” side up (facing you). It will fit loosely. Step 4: With a coin, replace the battery cap by turning clockwise. Important! Make sure the battery cap is closed firmly and is flat. This will ensure a consistent connection. Step 5: Gently tap the Pod. You should see the LED flash on, confirming you’ve successfully installed the battery! Step 6: After installing a new battery, you must sync your Pod to the MilestonePod App before your next run, in order to reset to the correct date and time. Every time you sync, you will get a quick alert icon to show you how your battery life is doing. Here are the general standards: GREEN "FULL" 100%-60% YELLOW "OK" 59%-30% RED "LOW" 29% or less

 

Can I use my Pod on more than one pair of shoes?

Technically, yes, the MilestonePod will work if swapped between shoes.

However, we strongly suggest you have a different Pod on each pair of shoes you run or walk in. The Pod is designed (and priced!) to live on one pair of shoes. Here is why:

     Accuracy - you run differently in different shoes
     Odometer feature - so you know exactly how many miles are on each pair of shoes
     Calibration protection - when you calibrate, the value is for your gait cycle for that specific shoe; gait cycle often differs between shoe types

There is no limit to how many Pods one MilestonePod App can support. When it's time to replace your shoes, you simply reset the Pod and move it to the new pair. No running data will be lost!

 

Should I attach the Pod to my left shoe or right shoe?

That’s up to you! The Pod will work the same on either shoe.

 

Is there a certain direction the Pod should face? Does it even matter?

The Pod can face either direction, with the “M” logo facing you or away from you.

 

Does it matter where I attach the Pod on my shoe?

Yes. Placing the Pod 3/4 of the way down towards your toe provides the most accurate tracking. Specifically, if your shoe has a drop of 8mm or above, use the second lace cross from your toe. If your shoe has a drop below 8mm, use the third lace cross from your toe.

 

How does the MilestonePod attach to my shoe?

MAKE IT CLICK! Slide the holder under a lace cross on either shoe 3/4 of the way down toward your toe. Twist Pod clockwise firmly onto the holder until you hear an audible “CLICK.” This is very important! Your Pod can fall off if not secured to the holder properly.

Placing the Pod about 3/4 of the way down towards your toe provides the most accurate tracking. Specifically, if your shoe has a drop of 8mm or above, use the second lace cross from your toe. If your shoe has a drop below 8mm, use the third lace cross from your toe.